Cartografia e Rilievo
Pianificatore di Missione
Disegna un'area di rilievo e ottieni vere linee di volo a serpentina, numero di immagini e tempo.
Solo un ausilio di pianificazione — non è un software certificato di pianificazione del volo né un'autorizzazione dello spazio aereo. Verifica sempre i risultati con il manuale del tuo velivolo e controlla le normative vigenti prima di volare. Disclaimer completo.
Click the map to draw your survey area, then fill in your camera and flight settings.
0 points placed.
Draw at least 3 points and fill in every camera field to plan the mission.
Flight lines are generated with the same local flat-earth geometry as the Area Calculator — accurate for survey-sized sites, including non-convex (irregularly shaped) areas. This is a coverage-planning aid, not a substitute for your flight controller's own mission-planning software.
How it works
Draw your survey area on the map, then enter your camera specs, flight altitude, speed and desired front/side overlap. The planner computes your image footprint and line spacing (the same math as the GSD and Coverage calculators) and sweeps real, boustrophedon (back-and-forth) flight lines across the polygon you drew — including correctly clipping lines around non-convex (irregularly shaped) areas.
Limitations
Flight time covers the flight lines themselves and excludes turnarounds between lines, climb/descent, and any battery-swap stops. Line generation uses a local flat-earth projection centered on your polygon — accurate for typical survey-sized sites, not country-sized shapes. This is a coverage-planning aid, not a substitute for your flight controller's own mission-planning software, and does not check airspace restrictions — use the Map/Airspace and NOTAM tools for that.